2452 CHAPTER 164: USER INTERFACE CONFIGURATION COMMANDS

sure? [Y/N] ]:y [Sysname-ui-vty0]-4]

#Telnet to the device again, the display brief interface loopback command will be executed automatically before the telnet connection breaks. And the following information will be displayed:

***************************************************************************

All rights reserved (2004-2006)

 

 

 

*

* Without

the owner’s prior written consent,

 

 

*

* No decompiling or reverse-switch fabricering shall be allowed.

*

**************************************************************************

 

<Sysname>

 

 

 

 

 

The brief

information of interface(s) under route mode:

 

 

Interface

Link

Protocol-link

Protocol type

Main IP

 

Loop1

UP

UP(spoofing)

LOOP

--

 

<Sysname>

 

 

 

 

 

authentication-mode

Syntax

authentication-mode { none password scheme [ command-authorization ] }

View

User interface view

Parameter

none: Performs no authentication.

 

password: Performs local password authentication.

 

scheme: Performs authorization and authentication of AAA. For details about

 

AAA, refer to “AAA Configuration Commands” on page 1913.

 

command-authorization: Performs command line authorization. HWTACACS

 

allows per-command authorization. An input command is executed only after it

 

passes authorization. For details about HWTACACS, refer to “HWTACACS

 

Configuration Commands” on page 1975.

Description

Use the authentication-modecommand to set the authentication mode when

 

users log onto the device using the current user interface.

 

By default, the authentication mode is password for TTY (asynchronous

 

interface), VTY, and AUX user interfaces and is none for Console interfaces.

Related command:

set authentication password.

c CAUTION: If you configure to adopt AAA authentication (that is, the authentication mode is scheme.), then the default user level is 0.

Example # Set that no authentication is needed when users use VTY 0 interface to log onto the device. (This mode may be insecure.)

Page 2452
Image 2452
3Com MSR 30 None Performs no authentication, Password Performs local password authentication, Set authentication password