Chapter

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

 

 

 

 

Feature

 

Description

Configuration Reference

 

 

 

Reroute Direct Calls to

Reroutes a direct call to users’ mobile phone to the

For more information, see the Cisco Unified

Remote Destination to

enterprise number (desk phone). For an incoming

Communications Manager Features and

Enterprise Number

call to remote destination (mobile phone), only

Services Guide, Cisco Unified Mobility.

 

 

remote destination rings; desk phone does not ring.

 

 

 

When the call is answered on their mobile phone,

 

 

 

the desk phone displays a Remote In Use message.

 

 

 

During these calls, users can make use of various

 

 

 

features of their mobile phone.

 

 

 

 

 

Remote Port

 

Allows the administrator to configure the speed

To configure the parameter in the Cisco

Configuration

 

and duplex function of the phone Ethernet ports

Unified CM Administration application,

 

 

remotely by using Cisco Unified CM

choose Device > Phone, select the appropriate

 

 

Administration. This enhances the performance for

IP phone, and scroll to the Product Specific

 

 

large deployments with specific port settings.

Configuration Layout pane (Switch Port

 

 

Note If the ports are configured for Remote Port

Remote Configuration or PC Port Remote

 

 

Configuration in Cisco Unified CM, the

Configuration).

 

 

 

 

 

data cannot be changed on the phone.

To configure the setting on multiple phones

 

 

 

simultaneously, configure the remote

 

 

 

configuration in either Enterprise Phone

 

 

 

Configuration (System > Enterprise Phone

 

 

 

Configuration) or Common Phone Profile

 

 

 

Configuration (Device > Device Settings >

 

 

 

Common Phone Profile.

 

 

 

(Switch Port Remote Configuration or PC Port

 

 

 

Remote Configuration)

 

 

 

Ring Tone Setting

Identifies ring type used for a line when a phone

For more information, see the following:

 

 

has another active call.

Cisco Unified Communications Manager

 

 

 

 

 

 

Administration Guide, Directory Number

 

 

 

Configuration.

 

 

 

“Creating Custom Phone Rings” section

 

 

 

on page 6-2.

 

 

 

Secure Conference

Allows secure phones to place audio

For more information about security, see the

 

 

conference calls using a secured conference

“Overview of Supported Security Features”

 

 

bridge.

section on page 1-11.

 

 

As new participants are added by using

For additional information, see the following:

 

 

Confrn, Join, cBarge, Barge softkeys or

Cisco Unified Communications Manager

 

 

MeetMe conferencing, the secure call icon

 

 

System Guide, “Conference Bridges.”

 

 

displays as long as all participants use secure

 

 

Cisco Unified Communications Manager

 

 

phones.

 

 

The Conference List displays the security level

Administration Guide, Conference

 

 

Bridge Configuration”.

 

 

of each conference participant. Initiators can

 

 

Cisco Unified Communications Manager

 

 

remove non-secure participants from the

 

 

Conference List. (Non-initiators can add or

Security Guide.

 

 

remove conference participants if the

 

 

 

Advanced Adhoc Conference Enabled

 

 

 

parameter is set.)

 

 

 

 

 

 

 

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

 

 

 

 

 

 

 

 

 

 

OL-20851-01

 

 

 

 

5-13

 

 

 

 

 

 

 

Page 83
Image 83
Cisco Systems 8945 Creating Custom Phone Rings section, Overview of Supported Security Features, Bridge Configuration