Chapter

Adding Users to Cisco Unified Communications Manager

The user must subscribe to services using the Cisco Unified CM User Options application. This web-based application provides a graphical user interface (GUI) for limited, end-user configuration of IP Phone applications.

Before you set up services, gather the URLs for the sites you want to set up and verify that users can access those sites from your corporate IP telephony network.

To set up these services, choose Device > Device Settings > Phone Services from Cisco Unified Communications Manager Administration. For more information, see the Cisco

Unified Communications Manager Administration Guide, Cisco Unified IP Phone Services Configuration, and the Cisco Unified Communications Manager System Guide, Cisco Unified IP Phone Services.

After you configure these services, verify that your users have access to the Cisco Unified Communications Manager User Options web-based application, from which they can select and subscribe to configured services. See the “How Users Subscribe to Services and Configure Phone Features” section on page A-2for a summary of the information that you must provide to end users.

Note To configure Cisco Extension Mobility services for users, go to the Cisco Unified Mobility” chapter in the Cisco Unified Communications Manager Features and Services Guide.

Adding Users to Cisco Unified Communications Manager

Adding users to Cisco Unified Communications Manager allows you to display and maintain information about users and allows each user to perform these tasks:

Access the corporate directory and other customized directories from a Cisco Unified IP Phone.

Create a personal directory.

Set up speed dial and call forwarding numbers.

Subscribe to services that are accessible from a Cisco Unified IP Phone.

You can add users to Cisco Unified Communications Manager using one of these following methods:

To add users individually, choose User Management > End User from Cisco Unified Communications Manager Administration.

For more information, see the Cisco Unified Communications Manager Administration Guide, End User Configuration.

To add users in batches, use the Bulk Administration Tool. This method also enables you to set an identical default password for all users.

For more information, see the Cisco Unified Communications Manager Administration Guide, Bulk Administration.

To add users from your corporate LDAP directory, choose System > LDAP > LDAP System from Cisco Unified Communications Manager Administration.

Note Once the Enable Synchronization from the LDAP Server is enabled, you will not be able to

add additional users from Cisco Unified Communications Manager Administration

For more information on LDAP, see the Cisco Unified Communications Manager System Guide, Understanding the Directory.

 

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

5-22

OL-20851-01

Page 92
Image 92
Cisco Systems 8941, 8945 manual Adding Users to Cisco Unified Communications Manager