Cisco Systems 8941, 8945 manual Join and Direct Transfer Policy, Bridge Configuration chapter

Chapter

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Video Support		Enables video support on the phone.	For more information refer to:
			• Cisco Unified Communications Manager
			Administration Guide, “Conference
			Bridge Configuration” chapter.
			• Cisco Unified Communications Manager
			System Guide, “Understanding Video
			Telephony” chapter.
			• Cisco VT Advantage Administration
			Guide, “Overview of Cisco VT
			Advantage” chapter.
Voice Messaging		Enables callers to leave messages if calls are	For more information, see the following:
System		unanswered.	• Cisco Unified Communications Manager
			Administration Guide, Cisco Voice-Mail
			Port Configuration.
			• Cisco Unified Communications Manager
			System Guide, Voice Mail Connectivity to
			Cisco Unified Communications Manager.

Join and Direct Transfer Policy

Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer feature implementation on the Cisco Unified IP Phone 8941 and 8945. In order for these applications to control and monitor these phones, you must configure the Join and Direct Transfer Policy to disable join and direct transfer on the same line or possibly across lines. You can configure the Join and Direct Transfer Policy for the following:

•To configure the policy for all phones on the system, choose System > Enterprise Phone Configurations from Cisco Unified Communications Manager Administration.

•To configure the policy to a group of phones, choose Device > Device Settings > Common Phone Profile from Cisco Unified Communications Manager Administration.

•To configure the policy on an individual phone, configure the Join and Direct Transfer Policy in the Phone Configuration for the specific phone.

Because this parameter can be configured in three different windows, the setting that takes precedence is determined in the following order:

1.Device Configuration window settings

2.Common Phone Profile window settings

3.Enterprise Phone Configuration window settings.

When you change the setting of the Join and Direct Transfer Policy Parameter, you must check the “Override Common Settings” box for the setting to take effect. The default policy is to have Same line, across line enabled for join and direct transfer.

To determine the proper setting for this parameter, refer to the documentation of the JTAPI/TAPI application.

	Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
5-16	OL-20851-01