Cisco Systems 8941 Cable Specifications, Network and Access Port Pinouts, Network Port Connector

Appendix

Cable Specifications

Cable Specifications

•RJ-9 jack (4-conductor) for handset and headset connection.

•RJ-45 jack for the LAN 10/100BaseT connection (labeled 10/100 SW on the Cisco Unified IP Phone 8941 and 8945).

•RJ-45 jack for a second 10/100BaseT compliant connection (labeled 10/100 PC on the Cisco Unified IP Phone 8941 and 8945).

•48-volt power connector.

Network and Access Port Pinouts

Although both the network and access ports are used for network connectivity, they serve different purposes and have different port pinouts.

•The network port is labeled network on the Cisco Unified IP Phone.

•The access port is labeled Computer on the Cisco Unified IP Phone.

Network Port Connector

Table C-2describes the network port connector pinouts.

Table C-2	Network Port Connector Pinouts
Pin Number		Function
1		BI_DA+
2		BI_DA-
3		BI_DB+
4		BI_DC+
5		BI_DC-
6		BI_DB-
7		BI_DD+
8		BI_DD-

Note “BI” stands for bidirectional, while DA, DB, DC and

DDstand for “Data A”, “Data B”, “Data C” and “Data D”, respectively.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

C-2 OL-20851-01