
Chapter
Adding Phones to the Cisco Unified CM Database
Related Topics
•Adding Phones with
•Adding Phones with Cisco Unified CM Administration, page
•Adding Phones with BAT, page
Adding Phones with Cisco Unified CM Administration
You can add phones individually to the Cisco Unified CM database by using Cisco Unified CM Administration. To do so, you first need to obtain the MAC address for each phone.
For information about determining a MAC address, see the “Determining the MAC Address for a Cisco Unified IP Phone” section on page
After you have collected MAC addresses, in Cisco Unified CM Administration, choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified CM, go to the “Cisco Unified Communications Manager Overview” chapter in the Cisco Unified Communications Manager System Guide.
Related Topics
•Adding Phones with
•Adding Phones with
•Adding Phones with BAT, page
Adding Phones with BAT
Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform batch operations, including registration, on multiple phones. To access BAT, choose Bulk Administration
To add phones by using BAT only (not in conjunction with TAPS), you can use the MAC address for each phone or dummy MAC addresses if you have a large number of new phones.
For information about determining a MAC address, see the “Determining the MAC Address for a Cisco Unified IP Phone” section on page
For detailed instructions about using BAT, go to the “Bulk Administration” chapter in the Cisco Unified Communications Manager Administration Guide.
Related Topics
•Adding Phones with
•Adding Phones with
•Adding Phones with Cisco Unified CM Administration, page
| Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) |