Cisco Systems 8941, 8945 manual Power Outage

Contents

Power Outage 2-4
Obtaining Additional Information about Power		2-5
Understanding Phone Configuration Files	2-5
Understanding the Phone Startup Process	2-6
Adding Phones to the Cisco Unified CM Database		2-8
Adding Phones with Auto-Registration	2-8
Adding Phones with Auto-Registration and TAPS 2-9
Adding Phones with Cisco Unified CM Administration 2-10
Adding Phones with BAT 2-10

		Determining the MAC Address for a Cisco Unified IP Phone							2-11
		Setting Up the Cisco Unified IP Phone
C H A P T E R	3						3-1
		Before You Begin 3-1
		Network Requirements			3-1
		Cisco Unified Communications Manager Configuration							3-2
		Understanding the Cisco Unified IP Phones 8941 and 8945 Components 3-2
		Network and Access Ports				3-2
		Handset	3-3
		Speakerphone		3-3
		Headset	3-3
		Installing the Cisco Unified IP Phone					3-5
		Reducing Power Consumption on the Phone 3-7
		Footstand	3-7
		Higher Viewing Angle			3-9
		Lower Viewing Angle			3-10
		Verifying the Phone Startup Process					3-10
		Configuring Startup Network Settings					3-11
		Configuring Security on the Cisco Unified IP Phone						3-11
		Configuring Settings on the Cisco Unified IP Phone
C H A P T E R	4							4-1
		Configuration Menus on the Cisco Unified IP Phone						4-1
		Displaying a Configuration Menu					4-2
		Unlocking and Locking Options					4-3
		Editing Values		4-3
		Network Setup Menu		4-4
		IPv4 Setup Menu Options			4-6
		Security Configuration Menu				4-8
		Trust List Menu		4-8

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

iv OL-20851-01