Cisco Systems 8941, 8945 manual Status Menu, Status Messages Screen, Select Status Messages

Chapter

Status Menu

Table 7-1	Model Information Settings for the Cisco Unified IP Phone 8941 and 8945
Option		Description	To Change
Active Load		Version of firmware currently installed on the	Display only—cannot configure.
		phone.
Last Upgrade		Date of the most recent firmware upgrade.	Display only—cannot configure.
Active Server		IP address or name of the server to which the	Display only—cannot configure.
		phone is registered.
Stand-by Server		IP address or name of the standby server.	Display only—cannot configure.

Status Menu

To display the Status menu, press the Applications button and then select Administrator Settings > Status. To exit the Status menu, press the Exit softkey.

The Status menu includes theses options, which provide information about the phone and its operation:

•Status Messages—Displays the Status Messages screen, which shows a log of important system messages. For more information, see the “Status Messages Screen” section on page 7-2.

•Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics. For more information, see the “Network Statistics Screen” section on page 7-6.

•Call Statistics—Displays counters and statistics for the current call. For more information, see the “Call Statistics Screen” section on page 7-8.

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated. You can access this screen at any time, even if the phone has not finished starting up. Table 7-2describes the status messages that might appear. This table also includes actions you can take to address errors.

To display the Status Messages screen, follow these steps:

Procedure

Step 1 Press the Applications button.

Step 2 Select Administrator Settings.

Step 3 Select Status.

Step 4 Select Status Messages.

To remove current status messages, press the Clear softkey.

To exit the Status Messages screen, press the Exit softkey.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

7-2 OL-20851-01