3Com MSR 50, MSR 30 manual Password-digit, # Add the access number 179 and enter access number view

2737

An access number can contain up to 31 characters, but no unacceptable characters such as a letter. At most 100 access numbers can be configured for the voice gateway.

The shortest match and exact match are preferred for access number match. If an access number template is the same as some voice entity template, the global number substitution rules in voice dial program view and those in voice subscriber line view will be valid for the access number, but no entity substitution rule can be matched in access number view.

Example # Add the access number 17909 and enter access number view.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909]

# Add the access number 179 and enter access number view.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 179.. [Sysname-voice-dial-anum179..]

# Delete the access number 17909.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] undo gw-access-number 17909

# Delete all access numbers.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] undo gw-access-number all Delete all access numbers, are you sure? (Y/N) y

password-digit

Syntax password-digit password-digit

undo password-digit

View Access number view

Parameter password-digit: Number of digits in a password, in the range of 1 to 16.

Description Use the password-digitcommand to configure the number of digits in a password for some access number in the card number/password process.