3Com MSR 50, MSR 30 IPV6 Ripng Configuration Commands, Default cost RIPng view, View RIPng view

IPV6 RIPNG CONFIGURATION

85 COMMANDS

checkzero

Syntax checkzero

undo checkzero

View RIPng view

Parameters None

Description Use the checkzero command to enable the zero field check on RIPng packets.

Use the undo checkzero command to disable the zero field check.

The zero field check is enabled by default.

Some fields in RIPng packet headers must be zero. These fields are called zero fields. You can enable the zero field check on RIPng packet headers. If any such field contains a non-zero value, the RIPng packet will be discarded.

Examples # Disable the zero field check on RIPng packet headers of RIPng 100.

<Sysname> system-view

[Sysname] ripng 100

[Sysname-ripng-100] undo checkzero

default cost (RIPng view)

Syntax default cost cost

undo default cost

View RIPng view

Parameters cost: Default metric of redistributed routes, in the range of 0 to 16.

Description Use the default cost command to specify the default metric of redistributed routes.

Use the undo default cost command to restore the default.