3Com MSR 30, MSR 50 manual Display ip routing-table statistics, View Any view

940CHAPTER 71: IP ROUTING TABLE COMMANDS

Direct Routing table Status : < Inactive>

Summary Count : 0

# Display summary information about static routes.

<Sysname> display ip routing-table protocol static Public Routing Table : Static

Summary Count : 2

Static Routing table Status : < Active>

Summary Count : 0

Static Routing table Status		: < Inactive>
Summary Count : 2
Destination/Mask	Proto	Pre	Cost	NextHop	Interface
1.2.3.0/24	Static	60	0	1.2.4.5	Vlan10
3.0.0.0/8	Static	60	0	2.2.2.2	Eth1/0

For detailed description of the above output, see Table 204.

display ip routing-table statistics

Syntax	display ip routing-table [ vpn-instance vpn-instance-name] statistics
View	Any view
Parameters	vpn-instancevpn-instance-name: Displays routing table information for a VPN
	instance. The VPN instance name is a string of 1 to 31 characters.
Description	Use the display ip routing-table statistics command to display statistics
	about the public network routing table or a VPN routing table.

Examples # Display statistics about the routes in the routing table.

<Sysname> display ip routing-table statistics
Proto	route	active	added	deleted	freed
DIRECT	24	4	25	1	0
STATIC	4	1	4	0	0
RIP	0	0	0	0	0
OSPF	0	0	0	0	0
IS-IS	0	0	0	0	0
BGP	0	0	0	0	0
Total	28	5	29	1	0

Table 205 Description on the fields of the display ip routing-table statistics command

Field	Description
Proto	Origin of the routes. Possible values include O_ASE for OSPF_ASE routes,
	O_NSSA for OSPF NSSA, and AGGRE for aggregated routes.
route	Number of routes from the origin
active	Number of active routes from the origin
added	Number of routes added into the routing table since the router starts up
	or the last routing table reset operation