3Com MSR 50, MSR 30 manual Display ip as-path, Syntax display ip as-path as-path-acl number, 1195

1195

View Routing policy view

Parameters value: Tag value, in the range 0 to 4294967295.

Description Use the apply tag command to set a specified tag value for RIP, OSPF or IS-IS routing information.

Use the undo apply tag command to remove the clause configuration.

No routing tag is set for RIP, OSPF or IS-IS routing information by default.

Related commands: if-match interface, if-match acl, if-matchip-prefix,if-match ip next-hop,if-match cost, if-match tag, route-policy,apply ip-addressnext-hop,apply local-preference,apply cost and apply origin.

Examples # Create routing policy policy1 with node 10, matching mode as permit. If a route

matches OSPF external route type 1, set the tag of the route to 100.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match route-type external-type1

[Sysname-route-policy] apply tag 100

display ip as-path

Syntax display ip as-path [ as-path-acl number ]

View Any view

Parameters as-path-acl-number: AS path ACL number, in the range of 1 to 256.

Description Use the display ip as-pathcommand to display BGP AS path ACL information.

Information about all BGP AS path ACLs will be displayed if no as-path-acl-numberis specified.

Related commands: ip as-path,if-matchas-pathand apply as-path.

Examples # Display the information of BGP AS path ACL 1.

<Sysname> display ip as-path-acl 1

ListID	Mode	Expression
1	permit	2
Table 283 Description on the fields of the display ip as-path-acl command
Field		Description
ListID		AS path ACL ID
Mode		Matching mode: permit, deny
Expression		Regular expression for matching