3Com MSR 50, MSR 30 manual Display isdn parameters, 567

567

Out	-	660016	03-07-05	11:23:01	03-07-05 11:23:04	3
Out	-	660022	03-07-05	11:23:01	03-07-05 11:23:04	3
In	10660016	10660016	03-07-05	11:23:01	03-07-05 11:23:04	3
In	10660022	10660022	03-07-05	11:23:01	03-07-05 11:23:04	3
Table 96 Description on the fields of the display isdn call-record command
Field			Description
Call Type			Call type: incoming or outgoing
Calling Number			Calling number
Called Number			Called number
Start Time			Time at which the call is set up
Stop Time			Time at which the call is terminated
Seconds Used			Duration of the call in seconds

display isdn parameters

Syntax display isdn parameters { protocol interface interface-type interface-number }

View Any view

Parameter protocol: ISDN protocol type, which can be ans, at&t, dss1, etsi, ni, ni2, ntt, or qsig.

interface-typeinterface-number:Specifies an interface by its type and number.

Description Use the display isdn parameters command to view the system parameters at layers 2 and 3 of the ISDN protocol, such as the durations of system timers and frame size.

If only ISDN protocol is specified, the system will display the default system parameters of ISDN.

Example # Display the system parameters of the ISDN protocol DSS1.

<Sysname> display isdn parameters dss1
DSS1 ISDN layer 2 system			parameters:
T200(sec)	T201(sec)		T202(sec)	T203(sec)	N200	K(Bri)	K(Pri)
1		1	2	10	3	1	7
DSS1 ISDN layer 3 system timers:
Timer-Number		Value(sec)
T301			240
T302			15
T303			4
T304			30
T305			30
T308			4
T309			90
T310			40
T313			4
T314			4
T316			120
T317			10
T318			4
T319			4