3Com MSR 30, MSR 50 Sendbuf threshold, Tcp, Syntax sendbuf threshold value Undo sendbuf threshold

918CHAPTER 70: TERMINAL ACCESS CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] sendbuf bufsize 200

sendbuf threshold

Syntax sendbuf threshold value

undo sendbuf threshold

View Terminal template view

Parameters value: Threshold of terminal send buffer, in bytes, ranging 50 to 2,048.

Description Use the sendbuf threshold command to set the threshold of the terminal send buffer.

Use the undo sendbuf threshold command to cancel the configured threshold of the terminal send buffer.

By default, no threshold is configured.

The send buffer is used to store the data that the router is to send to the terminal.

The threshold specifies the maximum data in bytes that the send buffer can store.

Example # Set the terminal send buffer threshold to 1,000 bytes.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] sendbuf threshold 1000

tcp

Syntax	tcp { keepalive time count nodelay recvbuf-size recvsize sendbuf-size sendsize }
	undo tcp { keepalive nodelay recvbuf-size sendbuf-size }
View	Terminal template view
Parameters	keepalive time count: Sets the parameters for sending TCP keepalives. time
	indicates the interval for sending keepalives, in seconds, ranging 10 to 7,200.
	count indicates the keepalive retransmission times, ranging 1 to 100.
	nodelay: Specifies not to use the TCP Nagle algorithm, that is, no TCP delay.
	recvbuf-sizerecvsize: TCP receive buffer size, in bytes, ranging 512 to 16,384.
	sendbuf-sizesendsize: TCP send buffer size, in bytes, ranging 512 to 16,384.