3Com MSR 30, MSR 50 manual Label switched Router ID

1574 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
	Blockade Multiplier: 4
	Graceful Restart: ENABLE
	Restart Time: 200 sec	Recovery Time: 150 sec
	Table 394 Description on the fields of the display mpls rsvp-te command
	Field		Description
	LSR ID		Label switched Router ID, in the
			format of X.X.X.X
	Resv Confirmation Request		Reserved confirmation request
	RSVP Hello Extension		State of the hello mechanism: enabled
			or disabled
	Hello Interval		Hello interval, in seconds
	Max Hello misses		Maximum number of consecutive
			hello losses before a neighbor is
			considered dead
	Path and Resv message refresh interval		Path and reservation message refresh
			interval, in seconds
	Path and Resv message refresh retries count		Number of Path and Resv message
			retransmissions
	Blockade Multiplier		Blockade multiplier
	Graceful Restart		State of GR: enabled or disabled
	Restart Time		GR restart interval in seconds
	Recovery Time		GR recovery interval in seconds

# Display the RSVP-TE configuration on interface Ethernet 1/0.

<Sysname> display mpls rsvp-te interface ethernet 1/0

Interface Ethernet1/0
Interface state: UP
Total-BW: 80		Used-BW: 20
Hello configured: NO		Num of Neighbors: 1
SRefresh feature: ENABLE		SRefresh Interval: 30sec
Authentication: DISABLE		Reliability configured: NO
Retransmit Interval: 500msec Increment Value: 1
Table 395 Description on the fields of the display mpls rsvp-te interface command
Field	Description
Interface Ethernet1/0	RSVP-TE enabled interface
Interface state	Physical interface state
Total-BW	Total bandwidth (in kbps)
Used-BW	Used bandwidth (in kbps)
Hello configured	State of the hello mechanism: enabled or disabled
Num of Neighbors	Number of neighbors connected to the interface
Srefresh feature	State of the summary refresh function: enabled or disabled
Srefresh interval	Summary refresh interval (in seconds)
Authentication	State of authentication: enabled or disabled
Reliability	Whether the reliability feature is configured: yes or no
Retransmit interval	Initial retransmission interval (in milliseconds)
Increment value	Increment value delta which governs the speed with which the
	interface increases the retransmission interval