3Com MSR 50, MSR 30 manual Vofr frf11-timer time, Undo vofr frf11-timer, Dropped

2719

vofr frf11-timer

Syntax	vofr frf11-timer time
	undo vofr frf11-timer
View	Voice view
Parameter	time: Trunk Wait timer length in the FRF.11 trunk mode in seconds, in the range of
	10 to 600.
Description	Use the vofr frf11-timercommand to configure the trunk wait timer length in
	the FRF.11 trunk mode.
	Use the undo vofr frf11-timercommand to restore the default.
	By default, the trunk wait timer length is 30 seconds.
	This command has global significance. The configuration is valid for all FRF.11
	trunk calls after the command is executed.
n	■ The Trunk Wait timer is specific to the FRF.11 trunk mode. Within the trunk
	wait timer length, incoming calls are prohibited and received voice packets are
	dropped.
	■ No signaling is exchanged in the FRF.11 trunk mode. When one voice gateway
	receives the first voice packet from its peer voice gateway over a dedicated
	voice channel, the former considers that a call is coming. When either party
	involved in a call hangs up, the peer voice gateway (relative to the party who
	hangs up) will still keep sending voice packets to the local voice gateway.
	Without the Trunk Wait timer mechanism, the local voice gateway will
	immediately alert the party who has hung up so that this party could never
	hang up successfully in the FRF.11 trunk mode.
Related command: call-mode.
Example	# Configure the Trunk Wait timer length in the FRF.11 trunk mode to 40 seconds.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] vofr frf11-timer 40