3Com MSR 30, MSR 50 manual Display bgp l2vpn, Tunnel select-seq load-balance-number on

1648 CHAPTER 97: MPLS L2VPN CONFIGURATION COMMANDS

	tunnel-policy-name: Tunneling policy for the VC, a string of 1 to 19 characters.
Description	Use the connection command to create a Kompella connection.
	Use the undo connection command to delete a Kompella connection on a CE
	interface.
	When creating a Kompella connection, you must specify the ID of the peer CE and
	the local CE interface.
	If you do not specify the tunneling policy, or specify the tunneling policy name but
	do not configure the policy, the default policy is used. The default tunneling policy
	uses LSP tunnels and the load balance number of one.
Related command:	tunnel select-seqload-balance-numberon page 1718.
Example	# Create a Kompella connection.
	<Sysname> system-view
	[Sysname] mpls l2vpn vpn1
	[Sysname-mpls-l2vpn-vpn1] ce ce1
	[Sysname-mpls-l2vpn-ce-vpn1-ce1] connection ce-offset 1 interface serial 2/0

display bgp l2vpn

Syntax	display bgp l2vpn { all group [ group-name] peer [ [ ip-address] verbose ]
	route-distinguisher route-distinguisher[ ce-id ce-id[ label-offset label-offset] ] }
View	Any view
Parameter	all: Displays all L2VPN information.
	group-name: Name of the peer group, a string of 1 to 47 characters.
	ip-address: IP address of the peer.
	verbose: Displays detailed information.
	route-distinguisher: Route distinguisher in the format of nn:nn or IP-address:nn. It
	can be a string of 3 to 21 characters.
	ce-id: VPN CE ID of the MPLS L2VPN connection, in the range 0 to 65535. A
	remote connection requires the remote CE number.
	label-offset: Label offset, in the range 0 to 65,535.
Description	Use the display bgp l2vpn command to display information about BGP L2VPN
	in the BGP routing table.

Related command: route-distinguisher (MPLS L2VPN view).