3Com MSR 50 Display mpls rsvp-te established, Begin include exclude regular-expression, 1575

1575

display mpls rsvp-te established

Syntax	display mpls rsvp-te established [ interface interface-typeinterface-number] [
	{ begin include exclude } regular-expression]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.
	: Filters output by regular expression.
	begin: Displays information beginning with a defined regular expression.
	include: Displays information that includes a defined regular expression.
	exclude: Displays information that excludes a defined regular expression.
	regular-expression: Regular expression, a string of 1 to 80 characters without
	spaces.
Description	Use the display mpls rsvp-te established command to display information
	about RSVP-TE globally or for an interface.
Example	# Display RSVP-TE information for interface Ethernet 1/0.
	<Sysname> display mpls rsvp-te established interface ethernet 1/0
	Interface Ethernet1/0
	Token Bucket Rate: 0.00	Peak Data Rate: 0.00
	Tunnel Dest: 2.2.2.2	Ingress LSR ID: 3.3.3.3
	Local LSP ID: 4	Session Tunnel ID: 4
	Next Hop Addr: 80.4.1.1
	Upstream Label: 1024	Downstream Label: 3
	Table 396 Description on the fields of the display mpls rsvp-te established command
	Field	Description
	Interface Ethernet1/0	RSVP-TE enabled Ethernet interface
	Token Bucket rate	Token bucket rate, a traffic parameter
	Peak Data Rate	Peak rate, a traffic parameter
	Tunnel Dest	Tunnel destination, in the format of X.X.X.X
	Ingress LSR ID	Ingress LSR ID, in the format of X.X.X.X
	Local LSP ID	Local LSP ID
	Session Tunnel ID	Session tunnel ID
	Next Hop Addr	Next hop address, in the format of X.X.X.X
	Upstream label	Upstream label
	Downstream Label	Downstream label