3Com MSR 30, MSR 50 manual Example # Shut down Cpos physical interface 1/0

684CHAPTER 45: CPOS INTERFACE CONFIGURATION COMMANDS

Example # Shut down CPOS physical interface 1/0.

<Sysname> system-view

[Sysname] controller cpos 1/0

[Sysname-Cpos1/0] shutdown

t1 channel-set

Syntax t1 t1-numberchannel-set set-numbertimeslot-list range [ speed { 56k 64k } ]

undo t1 t1-numberchannel-set set-number

View CPOS interface view

Parameter t1-number: Number of a T1 channel on the CPOS interface, in the range 1 to 84.

set-number: Channel set number in the range 0 to 23.

timeslot-listrange: Specifies a list of timeslots assigned to the channel set. The range argument is in the range of 1 to 24. While specifying timeslots, you can specify a single timeslot in the form of a number, or timeslots in a range in the form of number1-number2, or multiple timeslots in the form of number1, number2-number3.

speed { 56k 64k }: Specifies how timeslots are bundled. If the 56k keyword applies, timeslots form an N ⋅ 56 kbps bundle. If 64k applies, timeslots form an N

⋅64 kbps bundle. If the speed is not specified, the default 64 kbps applies.

Description Use the t1 channel-setcommand to bundle timeslots on the T1 channel.

Use the undo t1 channel-setcommand to remove the bundle.

By default, timeslot bundling is disabled on T1 channels.

The serial interface formed by a timeslot bundle is numbered in the form of interface number/channel number:channel set number.

Related command: t1 unframed.

Example # Bundle timeslots on T1 channel 1.

<Sysname> system-view

[Sysname] controller cpos 1/0

[Sysname-Cpos1/0] t1 1 channel-set 1 timeslot-list 1-23

# Enter the serial interface view after the bundling operation.

[Sysname-Cpos1/0] quit

[Sysname] interface serial 1/0/1:1

[Sysname-Serial1/0/1:1]