3Com MSR 30, MSR 50 manual Display ipv6 neighbors

834CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS

Table 175 Description on fields of display ipv6 interface brief (on a router)

Field	Description
(s)	Spoofing attribute of the interface, that is, the link protocol state of
	the interface is up, but the link does not exist, or the link is
	established on demand, instead of being permanent.
Interface	Name of the interface
Physical	Physical state of the interface
Protocol	Link protocol state of the interface
IPv6 Address	IPv6 address of the interface. Only the first of configured IPv6
	addresses is displayed. (If no address is configured for the interface,
	“Unassigned” will be displayed.)

display ipv6 neighbors

Syntax display ipv6 neighbors { ipv6-address all dynamic interface interface-typeinterface-numberstatic vlan vlan-id} [ { begin exclude include } string ]

View Any view

Parameter ipv6-address: IPv6 address whose neighbor information is to be displayed.

all: Displays information of all neighbors, including neighbors acquired dynamically and configured statically.

dynamic: Displays information of all neighbors acquired dynamically.

static: Displays information of all neighbors configured statically.

interface interface-type interface-number: Displays information of the neighbors of a specified interface.

vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID ranges from 1 to 4094.

: Filters the output information.

begin: Displays the neighbor entries from the first one containing the specified character string.

include: Displays the neighbor entries containing the specified character string.

exclude: Displays the neighbor entries without the specified character string.

string: A case-sensitive string, consisting of 1 to 256 characters.

Description Use the display ipv6 neighbors command to display neighbor information.

Example # Display all neighbor information.

<Sysname> display ipv6 neighbors all

Type: S-Static D-Dynamic