3Com MSR 30, MSR 50 Ike dpd, Ike local-name, Example # Use the ID type of name in IKE negotiation

2162 CHAPTER 141: IKE CONFIGURATION COMMANDS

Description Use the id-typecommand to select the type of the ID in IKE negotiation.

Use the undo id-typecommand to restore the default.

By default, the type of IP address is used in IKE negotiation.

Note that:

■In main mode, only the ID type of IP address can be used in performing IKE negotiation and creating an SA.

■In aggressive mode, either type can be used.

Related command: ike local-name,remote-name,remote-address,local-address,exchange-mode.

Example # Use the ID type of name in IKE negotiation.

<Sysname> system-view

[Sysname] ike peer peer1

[Sysname-ike-peer-peer1] id-type name

ike dpd

Syntax ike dpd dpd-name

undo ike dpd dpd-name

View System view

Parameter dpd-name: Name for the dead peer detection (DPD), a string of 1 to 15 characters.

Description Use the ike dpd command to create a DPD and enter IKE DPD view.

Use the undo ike dpd command to remove a DPD.

Example # Create a DPD named dpd2.

<Sysname> system-view

[Sysname] ike dpd dpd2

ike local-name

Syntax ike local-name name

undo ike local-name

View System view