3Com MSR 50, MSR 30 manual Auto-execute command, 2451

2451

**************************************************************************

User interface con0 is available.

Please press ENTER.

#Enter <s> at the prompt of "Please press ENTER". You will see the terminal session being started.

<Sysname>

%Mar 2 18:40:27:981 2005 Sysname SHELL/5/LOGIN: Console login from con0

auto-execute command

Syntax auto-execute command command

undo auto-execute command

View User interface view

Parameter command: Command to be automatically executed.

Description Use the auto-execute command command to specify a command to be executed automatically.

Use the undo auto-execute command command to disable this feature.

By default, command auto-execution is disabled.

The auto-execute command command is supported on all types of user interfaces except the Console port and the AUX port functioning as the console port.

Once a command is configured using the auto-execute command command, the system automatically executes the command when a user logs on from the interface where the command is configured. After the command is completed, the connection breaks automatically.

A good example is configuring the auto-execute command telnet command to let users telnet to the specified host automatically.

c CAUTION: The auto-execute command command may disable you from configuring the system through the terminal line to which the command is applied. Therefore, before configuring the command and saving it with the configuration (using the save command), make sure that you can access the system by other means to remove the configuration in case a problem occurs.

Example # Automatically execute the display brief interface loopback command after a user logs on from the VTY 0 interface.

<Sysname> system-view

[Sysname] user-interface vty 0 4

[Sysname-ui-vty0-4] auto-execute command display brief interface loopback

% This action will lead to configuration failure through ui-vty0-4. Are you