3Com MSR 50, MSR 30 manual Ospfv3 mtu-ignore, Ospfv3 timer dead, 1301

1301

Parameters priority: DR priority, in the range 0 to 255.

instance-id: ID of the instance an interface belongs to, in the range 0 to 255, which defaults to 0.

Description Use the ospfv3 dr-prioritycommand to set the DR priority for an interface of an instance.

Use the undo ospfv3 dr-prioritycommand to restore the default value.

The DR priority on an interface defaults to 1

An interface’s DR priority determines its privilege for DR/BDR selection, and the interface with the highest priority is considered first.

Examples # Set the DR priority for an interface of instance 1 to 8.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ospfv3 dr-priority 8 instance 1

ospfv3 mtu-ignore

Syntax ospfv3 mtu-ignore [ instance instance-id]

undo ospfv3 mtu-ignore [ instance instance-id]

View Interface view

Parameters instance-id: Instance ID, in the range 0 to 255, which defaults to 0.

Description Use the ospfv3 mtu-ignorecommand to configure an interface to ignore MTU when sending DD packets.

Use the undo ospfv3 mtu-ignorecommand to restore the default configuration.

MTU is not ignored by default.

Examples # Configure an interface that belongs to instance 1 to ignore MTU.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] ospfv3 mtu-ignore instance 1

ospfv3 timer dead

Syntax ospfv3 timer dead seconds [ instance instance-id]

undo ospfv3 timer dead [ instance instance-id]