3Com MSR 30, MSR 50 manual Display mpls lsp, Example # Display information about VPN instance vpn1

1528 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

Parameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.

: Filters the output information.

begin: Begins with the specified string.

include: Includes the specified string.

exclude: Excludes the specified string.

regular-expression: Regular expression, a string of 1 to 80 characters. No blank space is acceptable.

Description Use the display mpls ldp vpn-instancecommand to display information about a specified VPN instance.

Related command: mpls ldp (system view), mpls ldp (interface view).

Example # Display information about VPN instance vpn1.

<Sysname> display mpls ldp vpn-instance vpn1

LDP Global Information

--------------------------------------------------------------------

Protocol	Version	: V1	Neighbor	Liveness	: 60		Sec
Graceful	Restart	: Off	FT Reconnect Timer		:	60	Sec
MTU Signaling		: On	Recovery	Timer	:	60	Sec
		LDP Instance Information

--------------------------------------------------------------------

Instance ID	: 1	VPN-Instance	: vpn1
Instance Status	: Active	LSR ID	: 1.1.1.9
Hop Count Limit	: 32	Path Vector Limit	: 32
Loop Detection	: Off
DU Re-advertise Timer	: 30 Sec	DU Re-advertise Flag	: On
DU Explicit Request	: Off	Request Retry Flag	: On
Label Distribution Mode	: Ordered	Label Retention Mode : Liberal

n For description on the fields of the command output, see Table 370.

display mpls lsp

Syntax	display mpls lsp [ { incoming-interface outgoing-interface } interface-type
	interface-number ] [ in-labelin-label-value ] [ out-labelout-label-value ] [ { exclude
	include } dest-addr mask-length ] [ vpn-instancevpn-instance-name ] [ asbr
	protocol { bgp bgp-ipv6 crldp ldp rsvp-te static static-cr } ] [ egress ingress
	transit ] [ verbose ]
View	Any view
Parameter	incoming-interface: Incoming interface of the LSPs.
	outgoing-interface: Outgoing interface of the LSPs.