3Com MSR 30 Qos cq, Default values will not be displayed, Syntax qos cq cql cql-index Undo qos cq

1818 CHAPTER 113: CQ CONFIGURATION COMMANDS

Default values will not be displayed.

Related commands: qos cq, qos cql default-queue,qos cql inbound-interface,qos cql protocol, qos cql queue, qos cql queue serving.

Examples # Display information about a CQL.

<Sysname> display qos cql Current CQL Configuration: List Queue Params

23 Protocol ip fragments

30 Length 100

3 1 Inbound-interface Ethernet0

qos cq

Syntax qos cq cql cql-index

undo qos cq

View Interface view

Parameters cql-index: CQL index, in the range 1 to 16.

Description Use the qos cq command to apply the customized queue to an interface.

Use the undo qos cq command to restore the congestion management policy at the interface to FIFO.

By default, the congestion management policy at the interfaces is FIFO.

Except for interfaces encapsulated with X.25, all physical interfaces can use CQ.

One interface can only use one group of customized queues.

This command can configure multiple classification rules for each group in the CQL. During traffic classification, the system matches packets along the rule link. If matching a certain rule, a packet will be classified into the corresponding priority queue specified by this rule. If not matching any rule, it will go to the default priority queue.

Related commands: qos cql default-queue,qos cql inbound-interface,qos cql protocol, qos cql queue serving, qos cql queue queue-length.

Examples # Apply the CQ 5 on the Ethernet 1/0.

<Sysname> system-view

[Sysname] interface Ethernet1/0

[Sysname-Ethernet1/0] qos cq cql 5