3Com MSR 50 Sftp client source, Sftp ipv6, Related command Display sftp client source Example

	2187
Description	Use the sftp client ipv6 source command to specify the source IPv6 address or
	source interface for an SFTP client.
	Use the undo sftp client ipv6 source command to remove the configuration.
	By default, the client uses the interface address specified by the route of the device
	to access the SFTP server.
Example	# Specify the source IPv6 address of the SFTP client as 2:2::2:2.
	<Sysname> system-view
	[Sysname] sftp client ipv6 source ipv6 2:2::2:2
sftp client source
Syntax	sftp client source { ip ip-address interface interface-type interface-number }
	undo sftp client source
View	System view
Parameter	ip ip-address: Specifies a source IPv4 address.
	interface interface-typeinterface-number: Specifies a source interface by its type
	and number.
Description	Use the sftp client source command to specify the source IPv4 address or
	interface of an SFTP client.
	Use the undo sftp source-interfacecommand to remove the configuration.
	By default, a client uses the IP address or interface specified by the route to access
	the SFTP server.
Related command:	display sftp client source.
Example	# Specify the source IP address of the SFTP client as 192.168.0.1.
	<Sysname> system-view
	[Sysname] sftp client source ip 192.168.0.1
sftp ipv6
Syntax	sftp ipv6 server [ port-number] [ identity-key { dsa rsa } prefer-ctos-cipher
	{ 3des aes128 des } prefer-ctos-hmac { md5 md5-96 sha1 sha1-96 }
	prefer-kex { dh-group-exchange dh-group1 dh-group14 } prefer-stoc-cipher
	{ 3des aes128 des } prefer-stoc-hmac { md5 md5-96 sha1 sha1-96 } ] *

View User view