3Com MSR 30, MSR 50 manual Gw-access-number, Cmc=Vords

2736 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS

Table 703 Description on fields of the display voice radius statistic command

Field	Description
AcctRsp_PstnCaller	Accounting_Response message for PSTN caller
AcctRsp_VoipCaller	Accounting_Response message for VoIP caller
AcctRsp_PstnCalled	Accounting_Response message for PSTN callee
AcctRsp_VoipCalled	Accounting_Response message for VoIP callee
Account_Ok	Accounting_Ok message
Account_Failure	Accounting_Failure message
Cut	Cut message
CMC=>VORDS	Messages from the CMC module to the voice RADIUS module
Setup	Setup message
Alerting	Alerting message
Connect	Connect message
Release	Release message
DtmfInformation	DTMF digit
ChannelReady	Channel_Ready message
FaxVoiceSwitch	Fax_Voice_Switch message
FaxTone	Fax_Tone message

gw-access-number

Syntax gw-access-number access-number

undo gw-access-number { access-numberall }

View Voice dial program view

Parameter access-number: Access number (for example, 169 and 17909), a string of up to 31 characters consisting of digits 0 through 9 and the wildcard “.”. The wildcard “.” represents a digital character and must follow a digit or appear separately.

all: Deletes all access numbers.

Description Use the gw-access-numbercommand to configure an access number or enter access number view.

Use the undo gw-access-numbercommand to delete one or all access numbers.

By default, no access number is configured.

When you delete all configured access numbers, the voice gateway will give alarm information, requiring you to make a confirmation. You can press <Y> to delete all access numbers or press <N> to cancel the operation.