3Com MSR 50, MSR 30 manual Ssh client ipv6 source, Ssh client source, Undo ssh client ipv6 source

2191

server later, it can use the locally saved public host key of the server to authenticate the server.

With the first authentication function disabled, an SSH client cannot access any server whose public host key it does not know. In this case, you must configure the public host key of the server to be accessed and specify the public key name on the client at first.

Example # Enable the first authentication function.

<Sysname> system-view

[Sysname] ssh client first-time enable

ssh client ipv6 source

Syntax	ssh client ipv6 source { ipv6 ipv6-addressinterface interface-type
	interface-number }
	undo ssh client ipv6 source
View	System view
Parameter	ipv6 ipv6-address: Specifies a source IPv6 address.
	interface interface-typeinterface-number: Specifies a source interface by its type
	and number.
Description	Use the ssh client ipv6 source command to specify the source IPv6 address or
	source interface for the SSH client.
	Use the undo ssh client ipv6 source command to remove the configuration.
	By default, the client uses the source address specified by the route of the device
	to access the SSH server.
Example	# Specify the source IPv6 address as 2:2::2:2 for the SSH client.
	<Sysname> system-view
	[Sysname] ssh client ipv6 source ipv6 2:2::2:2

ssh client source

Syntax ssh client source { ip ip-address interface interface-type interface-number } undo ssh client source

View System view

Parameter ip ip-address: Specifies a source IPv4 address.