3Com MSR 50, MSR 30 manual Authorization, Related command authorization-did, 2725

2725

View Voice AAA client view

Parameter None

Description Use the authentication-didcommand to enable the authentication function for all one-stage dialing users.

Use the undo authentication-didcommand to disable the authentication function.

By default, the authentication function is disabled for all one-stage dialing users.

This command is applicable to only one-stage dialing users, instead of two-stage dialing users.

With this function enabled, the calling number of one-stage dialing users who want to make IP calls is sent to the RADIUS server for authentication. Only users who pass authentication can make IP calls. Those who fail authentication will be disconnected and cannot make IP calls.

The authentication function must be enabled before the authorization function. When the authentication function is disabled, the authorization function will automatically be disabled, and meanwhile, the authorization-didand undo authorization-didcommands will be unavailable.

Related command: authorization-did.

Example # Enable the authentication function for one-stage dialing users.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] aaa-client

[Sysname-voice-aaa] authentication-did

authorization

Syntax authorization

undo authorization

View Access number view

Parameter None

Description Use the authorization command to enable the authorization function for users who dial some access number.

Use the undo authorization command to disable the authorization function.

By default, the authorization function is disabled for users who dial access numbers.