3Com MSR 30, MSR 50 manual Probe count, Syntax probe count times Undo probe count

2278 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

Parameter password: Password used to log onto the FTP server, a string of 1 to 32 characters. It is case sensitive.

Description Use the password command to configure a password used to log onto the FTP server.

Use the undo password command to remove the configured password.

By default, no password is configured for logging onto the FTP server.

Related command: “username (FTP test type view)” on page 2287, “operation (FTP test type view)” on page 2276.

Example # Configure the password used for logging onto the FTP server as ftpuser.

<Sysname> system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] password ftpuser

probe count

Syntax probe count times

undo probe count

View Any NQA test type view

Parameter times: Number of probes in a test, in the range 1 to 15.

Description Use the probe count command to configure the number of probes in a test.

Use the undo probe count command to restore the default.

By default, one probe is performed in a test.

■For a TCP or DLSw test, one probe means one connection;

■For a UDP-jitter test, the number of packets sent in one probe depends on the probe packet-numbercommand;

■For an FTP, HTTP or DHCP test, one probe means to carry out a corresponding function;

■For an ICMP-echo or UDP-echo test, one packet is sent in one probe;

■For an SNMP test, three packets are sent in a probe.

If the number of probes in a test is greater than 1, the system sends a second packet after it sends the first packet and receives a response packet. If the system does not receive a response packet, it waits for the test timer to expire before sending a second probe packet. The process is repeated until the specified probes are completed.