3Com MSR 50 Garp timer leaveall, Related command display garp timer, Dependencies of Garp timers

413

When restoring the default GARP timers, you are recommended to do that on the timers in the order of hold, join, leave, and leaveall.

When configuring GARP timers, note that their values are dependent on each other and must be a multiplier of five centiseconds. If the value range for a timer is not desired, you may change it by tuning the value of another timer as shown in the following table:

Table 53 Dependencies of GARP timers

Timer	Lower limit	Upper limit
Hold	10 centiseconds	Not greater than half of the
		join timer setting

Join	Not less than two times the hold timer
	setting
Leave	Greater than two times the join timer
	setting
Leaveall	Greater than the leave timer setting

Less than half of the leave timer setting

Less than the leaveall timer setting

32765 centiseconds

Related command: display garp timer.

Example # Set the GARP join timer to 25 centiseconds, assuming that both the hold timer and the leave timer are using the default.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] garp timer join 25

garp timer leaveall

Syntax garp timer leaveall timer-value

undo garp timer leaveall

View System view

Parameter timer-value: Leaveall timer setting, in the range 65 to 32765 (in centiseconds). Note that the setting of the leaveall timer must be a multiple of 5 and must be greater than the leave timer settings of all the ports.

Description Use the garp timer leaveall command to set the leaveall timer of GARP.

Use the undo garp timer leaveall command to restore the default. This may fail if the default is less than the setting of the current leave timer.

By default, the setting of the leaveall timer is 1000 centiseconds (that is, 10 seconds).

A leaveall timer starts upon the start of a GARP application entity. When this timer expires, the entity sends a LeaveAll message so that other entities can re-register its attribute information and starts another leaveall timer at the same time.