3Com MSR 50, MSR 30 manual License register, Reboot, Syntax license register serial-number

2259

license register

Syntax license register serial-number

View User view

Parameter serial-number: Specifies the serial number of a card, in the format of XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, in which X represents a character. The character can be a letter (case sensitive), a number, + or (/).

Description

n

Use the license register command to register the software serial number for a device.

The serial number can be obtained by purchasing letter of authorization. To successfully register a serial number, you must enter the serial number in the specified format.

Only users at management level can execute this command.

Example # Register the software serial number of a device.

<Sysname> system-view

[Sysname] license register VZa47-6AbBh-gtO9c-K47A0-F79D8-dE84O-tg2j0

Register successfully!

reboot

Syntax	reboot [ slot slot-number]
View	User view
Parameter	slot slot-number: Specifies the slot number of a card. The value range varies with
	devices.
Description	Use the reboot command to reboot a card or a device.

c CAUTION:

■This command reboots the device, thus resulting in service interruption. Please use it with caution.

■If a primary boot file fails or does not exist, the device cannot be rebooted with this command. In this case, you can re-specify a primary boot file to reboot the device, or you can power off the device then power it on and the system automatically uses the secondary boot file to restart the device.

■The slot keyword is applicable on an MSR 50 series router only.

Example # Reboot the device.