3Com MSR 30 Probe packet-timeout, Probe timeout, Syntax probe timeout timeout Undo probe timeout

2280 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

Example # Configure the number of consecutive packets in a UDP-jitter probe as 100.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter [Syaname-nqa-admin-test-udp-jitter] probe packet-number 100

probe packet-timeout

Syntax probe packet-timeout packet-timeout

undo probe packet-timeout

View UDP-jitter test type view

Parameter packet-timeout: Timeout time for waiting for responses in a UDP-jitter test, in the range 10 to 3600000 milliseconds.

Description Use the probe packet-timeoutcommand to configure the timeout time for waiting for responses in a UDP-jitter test.

Use the undo probe packet-timeoutcommand to restore the default.

By default, the timeout time in a UDP-jitter test is 3000 milliseconds.

Example # Configure the timeout time for waiting for responses in a UDP-jitter test as 100 milliseconds.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter [Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100

probe timeout

Syntax probe timeout timeout

undo probe timeout

View DHCP/DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo test type view

Parameter timeout: Timeout time in a probe except UDP-jitter probe, in milliseconds. For an FTP or HTTP probe, the value range is 10 to 86400000; for a DHCP, DLSw, ICMP-echo, SNMP, TCP or UDP-echo probe, the value range is 10 to 3600000.

Description Use the probe timeout command to configure the timeout time in a probe.

Use the undo probe timeout command to restore the default.

By default, the timeout time is 3000 milliseconds.