3Com MSR 50, MSR 30 manual Public-key local destroy, display public-key local Example

2181

bits and defaults to 1024. If the key pair already exists, the system will ask you whether you want to overwrite it.

■The configuration of this command can survive a reboot. You only need to configure it once.

Related command:	public-key local destroy, display public-key local.
Example	# Create local RSA key pair.
	<Sysname>	system-view
	[Sysname]	public-key local create rsa
	The range	of public key size is (512 ~ 2048).
	NOTES: If	the key modulus is greater than 512,
	It	may take a few minutes.
	Press CTRL+C to abort.
	Input the	bits in the modulus [default = 1024]:
	Generating keys...
	........++++++
	....................................				++++++
	.......++++++++
	......................		++++++++
	.
	# Create local DSA key pair.
	<Sysname>	system-view
	[Sysname]	public-key local create dsa
	The range	of public key size is (512 ~ 2048).
	NOTES: If	the key modulus is greater than 512,
	It	will take a few minutes.
	Press CTRL+C to abort.
	Input the	bits in the modulus[default = 1024]:
	Generating keys...
	.++++++++++++++++++++++++++++++++++++++++++++++++++*
	........+	+	+					+	..+....
	...................	+	+			+		+...	+....
	.+	+..+	......+			+	+	...+	....+..
	.....+	+	+		+			+	.......
	.+	+	+	+	...	+			+
	....+	+	+		+	....+			+++
	++++++++++++++++++++++++++++++++++++++++++++++++*
	.
n	■ Pressing CTRL+C quits the session of generating the local RSA key pair rather
	than aborting the generation of the local RSA key pair.

■Be sure to press CTRL+C before inputting the bits in the modulus.

public-key local destroy

Syntax public-key local destroy { dsa rsa }

View System view