3Com MSR 50, MSR 30 manual Basic Dlsw Configuration Commands, Display dlsw circuits

BASIC DLSW CONFIGURATION

21 COMMANDS

code nrzi

Syntax code nrzi

undo code

View Synchronous serial interface view

Parameter None

Description Use the code nrzi command to configure the synchronous serial interface to use NRZI encoding.

Use the undo code command to configure the synchronous serial interface to use NRZ encoding.

By default, the NRZ encoding scheme is used on the synchronous serial interface.

There are two encoding schemes, NRZI and NRZ, for synchronous serial interface. The NRZ encoding scheme is generally used for synchronous serial interfaces of routers. The serial interfaces of some SNA devices, however, use NRZI encoding. Therefore, the encoding scheme of routers should be changed according to the encoding schemes used on the connected devices.

Example # Configure Serial 1/0 to use NRZI encoding.

<Sysname> system-view

[Sysname] interface serial 1/0

[Sysname-Serial1/0] code nrzi

display dlsw circuits

Syntax display dlsw circuits [ circuit-id] [ verbose ]

View Any view

Parameter circuit-id: Specifies the ID of a DLSw virtual circuit, in the range of 0 to 0xFFFFFFFF.

verbose: Displays the detailed information of the virtual circuits.