3Com MSR 30, MSR 50 Du-readvertise timer, Are both, Syntax du-readvertise Undo du-readvertise

1538 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

n	■	For an ingress, no statistics is collected in the incoming direction and the start
		time and end time in the InSegment part of the command output are both 0.
	■	Similarly, for an egress, no statistics is collected in the outgoing direction and
		the start time and end time in the OutSegment part of the command output
		are both 0.

du-readvertise

Syntax du-readvertise

undo du-readvertise

View MPLS LDP view/MPLS LDP VPN instance view

Parameter None

Description Use the du-readvertisecommand to enable label readvertisement for DU mode.

Use the undo du-readvertisecommand to restore the default.

By default, label readvertisement is enabled in DU mode.

Example # Enable DU mode label readvertisement for the public network LDP.

<Sysname> system-view

[Sysname] mpls ldp

[Sysname-mpls-ldp] du-readvertise

# Enable DU mode label readvertisement for LDP instance named vpn1.

<Sysname> system-view

[Sysname] mpls ldp vpn-instance vpn1

[Sysname-mpls-ldp-vpn-instance-vpn1] du-readvertise

du-readvertise timer

Syntax du-readvertise timer value

undo du-readvertise timer

View MPLS LDP view/MPLS LDP VPN instance view

Parameter value: Label readvertisement interval in seconds. It ranges from 1 to 65,535.

Description Use the du-readvertise timer command to set the interval for label readvertisement in DU mode.

Use the undo du-readvertise timer command to restore the default.