3Com MSR 50, MSR 30 manual Tracert ipv6, Range 1 to 65535, defaulting to, With IPv6 address, 2401

2401

press CTRL_C to break

1128.3.112.1 10 ms 10 ms 10 ms

2128.32.210.1 19 ms 19 ms 19 ms

3128.32.216.1 39 ms 19 ms 19 ms

4128.32.136.23 19 ms 39 ms 39 ms

5128.32.168.22 20 ms 39 ms 39 ms

6128.32.197.4 59 ms 119 ms 39 ms

7131.119.2.5 59 ms 59 ms 39 ms

8129.140.70.13 80 ms 79 ms 99 ms

9129.140.71.6 139 ms 139 ms 159 ms

10129.140.81.7 199 ms 180 ms 300 ms

11129.140.72.17 300 ms 239 ms 239 ms

12* * *

13128.121.54.72 259 ms 499 ms 279 ms

14* * *

15* * *

16* * *

17* * *

1818.26.0.115 339 ms 279 ms 279 ms

tracert ipv6

Syntax	tracert ipv6 [ -ffirst-ttl -mmax-ttl -pport -qpacket-number -wtimeout ] *
	remote-system
View	Any view
Parameter	-ffirst-ttl: Specifies the first TTL, that is, the allowed number of hops for the first
	packet, in the range 1 to 255. It defaults to 1 and must be less than the maximum
	TTL.
	-mmax-ttl: Specifies the maximum TTL, that is, the maximum allowed number of
	hops for a packet, in the range 1 to 255. It defaults to 30 and must be greater
	than the first TTL.
	-pport: Specifies the UDP port number of the destination device, in the range 1 to
	65535. The default value is 33434. It is unnecessary to modify this parameter.
	-qpacket-number: Specifies the number of probe packets sent each time, in the
	range 1 to 65535, defaulting to 3.
	-wtimeout: Specifies the timeout time of the probe packets, in the range 1 to
	65535, in milliseconds. The default value is 5000 ms.
	remote-system: IPv6 address or host name (a string of 1 to 46 characters) of the
	destination device.
Description	Use the tracert ipv6 command to view the routers the IPv6 packets traverse from
	the source to the destination device.
Example	# View the routes involved for packets to travel from the source to the destination
	with IPv6 address 3002::1