3Com MSR 30, MSR 50 manual Ipx sap timer update, Ipx service

2548 CHAPTER 172: IPX CONFIGURATION COMMANDS

ipx sap timer update

Syntax ipx sap timer update seconds

undo ipx sap timer update

View System view

Parameter seconds: SAP updating interval, ranging from 10 to 60,000 seconds.

Description Use the ipx sap timer update command to specify the IPX SAP updating interval.

Use the undo ipx sap timer update command to restore the default.

By default, the update interval is 60 seconds.

Using this command does not take effect on an interface that adopts triggered update.

Related command: ipx sap multiplier, ipx update-change-only.

Example # Specify the SAP updating interval as 300 seconds.

<Sysname> system-view

[Sysname] ipx sap timer update 300

ipx service

Syntax ipx service service-type server-name network.node socket hop hopcount [ preference preference ]

undo ipx service { service-type [server-name [ network.node ] ] [ preference preference ] all }

View System view

Parameter service-type: Service type, ranging from 0 to 0xFFFF. A value of 0 indicates all service types.

server-name: Name of the server which provides the service, a string of 1 to 47 characters.

network.node: Network ID and node ID of a server. Network ID is an 8-bit hexadecimal number, ranging from 0x1 to 0xFFFFFFFD. Node ID has a length of 48 bits, represented by a triplet of 4-digit hexadecimal numbers separated by “-”. Leading 0s can be omitted.

socket: It is a 4-bit hexadecimal number, ranging from 0x1 to 0xFFFF.