Troubleshooting (Continued)
| Symptom | Cause | Correction |
|
|
|
|
| Some channels are | Those channels were deleted with the | Use CH. ADD/DEL. to restore channels. |
| skipped over when | CH. ADD/DEL option. | See “Channel Selection” on page 15. |
| using CH (v/V) |
|
|
|
|
|
|
| Picture and sound of | Antenna or cables are loose. | Tighten connections or replace cable. |
| broadcasting channel |
|
|
| are weak or missing. |
|
|
| Wrong TUNING BAND option is being | Try all TUNING BAND options. See | |
|
| ||
|
| used. | “Channel Selection” on page 15 for |
|
|
| details. |
| Camcorder image is not | Camcorder is off. | Turn camcorder on and operate |
| shown. |
| properly. |
|
|
|
|
| Camcorder image via | DVD+VCR SOURCE SELECT is not set | Press INPUT to select LINE input chan- |
| A/V input to DVD+VCR | to LINE1 or LINE2. | nel (LINE1 or LINE2). |
| is not shown on TV |
|
|
| screen. |
|
|
| Timer recording is not | Clock in DVD+VCR is not set to correct | Set clock to correct time. See “Setting |
| possible. | time. | the Clock” on page 16. |
|
|
|
|
|
| Timer has been programmed | Reprogram Timer. See “Timer |
|
| incorrectly. | Recording” on pages 22 and 23. |
|
| indicator does not appear after pro- | Reprogram Timer. |
|
| gramming timer. |
|
|
|
|
|
| indicator appears | DVD+VCR is in Timer Recording mode. | This is the normal indication that the |
| after DVD+VCR is turned |
| DVD+VCR is in TIMER mode. |
| off. |
|
|
| Stereo Audio Record | TV is not | No action is possible. |
|
|
| |
| Broadcast program is not in stereo for- | No action is possible. | |
| and/or Playback is not | ||
| mat. |
| |
| present. |
| |
|
|
| |
| DVD+VCR A/V Out jacks are not con- | Make A/V connections. Stereo is | |
|
| ||
|
| nected to TV A/V In jacks. | available only via A/V output from |
|
|
| DVD+VCR. |
|
|
|
|
|
| DVD+VCR Audio/Video Out is not | Select AUX or A/V source as TV input. |
|
| selected for viewing at the TV. |
|
|
|
|
|
|
| DVD+VCR BROADCAST TYPE mode is | Set BROADCAST TYPE mode to |
|
| set to SAP or MONO. | STEREO. See “Setting the VCR Setup |
|
|
| Menu” on page 15. |
|
|
|
|
| The "PROGRESSIVE | DVD+VCR was turned off while setting | Press and hold the STOP button for |
| SCAN MODE" mes- | the Progressive scan mode. | more than 5 seconds |
| sage remains on- |
|
|
| screen. |
|
|
|
|
|
|
REFERENCE
Moisture Condensation
Moisture condensation can occur: | In locations where moisture condensation may occur: | ||
|
|
|
|
• | When the DVD+VCR is moved from a cold place to a | • | Keep the DVD+VCR plugged into an AC power outlet |
| warm place. |
| with POWER On. This will help prevent condensation. |
• | Under extremely humid conditions. | • | When condensation has occurred, wait a few hours |
|
|
| for the DVD+VCR to dry before using it. |
|
|
|
|
35
