DVD Operation Setup (Continued)
AUDIO
Each DVD disc has a variety of audio output options. Set the player’s Audio Output according to the type of audio system you use.
Surround
Dolby Digital
Bitstream: Select “Bitstream” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
PCM: Select when connected to a
DTS
Bitstream: Select “Bitstream” if you connected the DVD Player’s DIGITAL OUT jack to a DTS decoder (or an amplifier or other equipment with a DTS decoder).
Off: If you select “Off”, the DTS signal through the DIGI- TAL OUT jack is not outputted.
MPEG
Bitstream: Select “MPEG” if you connected the DVD Player’s DIGITAL OUT jack to a MPEG decoder (or an amplifier or other equipment with a MPEG decoder).
PCM: Select when connected to a
Sample Freq. (Frequency)
To change the Sample Frequency setting, first select the desired Dolby Digital, DTS, and MPEG mode as indicated as above.
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz, so your system can decode them. If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is made, this unit will pass through each type of signal without any further processing.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest scenes), e.g., when watching a movie late at night. With DRC set to ON, you can listen to a movie at a lower volume without losing sound clarity.
Surround
Select the appropriate Surround Sound option for your audio equipment:
Stereo: Select when connected to an analog amplifier, stereo receiver or stereo television.
3D: Select for a simulated 3D effect from two speakers.
Dolby Digital: Select when connected to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
DTS: Select when connected to a DTS decoder (or an amplifier or other equipment with a DTS decoder).
OTHERS
The AutoPlay and YourDVD setting can be changed.
OTHERS
AutoPlayOff
YourDVDOff
Move 
Select
AutoPlay DVD
When you load a DVD with AutoPlay turned on, the DVD +VCR will bypass the Disc menu and trailers and start playing the movie automatically. Set AutoPlay to ON or OFF.
YourDVD DVD
When you load a DVD with the YourDVD feature turned on, the DVD+VCR will automatically search the disc for your Audio, Subtitle and Surround preferences and choose them if available on the disc. Set YourDVD to ON or OFF.
PREPARATION
19
