3Com MSR 50, MSR 30 Silent-interfaceOSPFv3 view, Router-id router-id, Related commands Ospfv3

1305

	<Sysname> system-view
	[Sysname] OSPFv3
	[Sysname-OSPFv3-1] preference 150
router-id
Syntax	router-id router-id
	undo router-id
View	OSPFv3 view
Parameters	router-id: A 32-bit router ID, in IPv4 address format.
Description	Use the router-idcommand to configure the OSPFv3 router ID.
	Use the undo router-idcommand to remove a configured router ID.
	Router ID is the unique identification of an OSPF process in an autonomous
	system. An OSPFv3 process cannot run without a Router ID.
	Make sure that different processes have different Router IDs.
Related commands:	ospfv3.
n	By configuring different router IDs for different processes, you can run multiple
	OSPFv3 processes on a router.
Examples	# Configure the Router ID as 10.1.1.3 for OSPFv3 process 1.
	<Sysname> system-view
	[Sysname] ospfv3 1
	[Sysname-ospfv3-1] router-id 10.1.1.3

silent-interface(OSPFv3 view)

Syntax silent-interface{ interface-type interface-number all }

undo silent-interface{ interface-type interface-number all }

View OSPFv3 view

Parameters interface-type interface-number: Interface type and number

all: Specifies all interfaces.

Description Use the silent-interfacecommand to disable the specified interface from sending OSPFv3 packets.