3Com MSR 30, MSR 50 manual Display mpls rsvp-te peer, Filters output by regular expression, Spaces

1576 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

display mpls rsvp-te peer

Syntax display mpls rsvp-te peer [ interface interface-typeinterface-number] [ { begin

	include exclude } regular-expression ]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.
	: Filters output by regular expression.
	begin: Displays information beginning with a defined regular expression.
	include: Displays information that includes a defined regular expression.
	exclude: Displays information that excludes a defined regular expression.
	regular-expression: Regular expression, a string of 1 to 80 characters without
	spaces.

Description Use the display mpls rsvp-te peer command to display information about RSVP-TE neighbors on the specified or all interfaces.

Example # Display information about RSVP-TE neighbors on all interfaces.

<Sysname> display mpls rsvp-te peer

Interface	Ethernet1/0
Neighbor Addr: 80.4.1.1
SrcInstance: 841			NbrSrcInstance: 928
PSB Count: 0			RSB Count: 1
Hello Type Sent:		ACK	Neighbor Hello Extension: ENABLE
SRefresh Enable:		NO	Reliability Enable: YES
Graceful Restart		State: Ready
Restart Time: 200 sec			Recovery Time: 150 sec
Interface Ethernet1/1
Neighbor Addr: 80.2.1.1
SrcInstance: 832			NbrSrcInstance: 920
PSB Count: 1			RSB Count: 0
Hello Type Sent:		REQ	Neighbor Hello Extension: ENABLE
SRefresh Enable:		NO	Reliability Enable: YES
Graceful Restart		State: Not ready
Restart Time: ---			Recovery Time: ---

Table 397 Description on the fields of the display mpls rsvp-te peer command

Field	Description
Interface Ethernet1/0	RSVP-TE enabled Ethernet interface
Neighbor Addr:	Neighbor address, in the format of X.X.X.X.
SrcInstance	Instance of source Message ID
NbrSrcInstance	Instance of neighbor Message ID
PSB Count	Number of path state blocks