3Com MSR 50, MSR 30 manual Display mpls l2vpn, Vpn-name local-ce remote-ce

1657

VC ID	ID	Addr	Encap	VC Label	Bit	MTU
100	0	3.3.3.9	ppp	1025	0	1500
Table 431 Description on the fields of the display mpls l2vc remote-info command

Field	Description
total remote ldp vc	Total number of remote LDP VCs
Transport VC ID	Remote VC ID
Group ID	Remote VC group ID, used for the L2VPN VC FEC TLV field of
	LDP messages
Peer Addr	IP address of the peer
Remote Encap	Encapsulation type of the remote interface
Remote VC Label	Remote VC label
C Bit	Control word, which can be 0 or 1
Remote MTU	MTU of the remote interface

display mpls l2vpn

Syntax	display mpls l2vpn [ export-route-target-list import-route-target-list vpn-name
	vpn-name[ local-ce remote-ce ] ]
View	Any view
Parameter	export-route-target-list: Displays the export route target list.
	import-route-target-list: Displays the import route target list.
	vpn-name: VPN name, a case insensitive string of 1 to 31 characters that cannot
	include the character of “-”.
	local-ce: Displays the configurations and status of all local CEs of a specified VPN.
	remote-ce: Displays the configurations and status of remote CEs learned from
	other PEs.
Description	Use the display mpls l2vpn command to display information about L2VPNs
	configured on a PE.
	If you do not specify a VPN, the command displays information about all L2VPNs.
Example	# Display the L2VPN export route target list.
	<Sysname> display mpls l2vpn export-route-target-list
	export vpn target list: 755:7 888:8

Table 432 Description on the fields of display mpls l2vpn export-route-target-list

Field	Description
export vpn target list	BGP VPN export route target list

# Display information about all L2VPNs configured on the PE.