3Com MSR 50 Maximum load-balancing RIP view, # Set the default cost for redistributed routes to

1171

<Sysname> system-view [Sysname] rip 1

[Sysname-rip-1] import-route static cost 4

# Set the default cost for redistributed routes to 3.

[Sysname-rip-1] default cost 3

# Redistribute OSPF routes with the cost being the default cost.

[Sysname-rip-1] import-route ospf

maximum load-balancing (RIP view)

Syntax maximum load-balancing number

undo maximum load-balancing

View RIP view

Parameters number: Maximum number of load balanced routes, in the range 1 to 8.

Description Use the maximum load-balancingcommand to specify the maximum number of load balanced routes.

Use the undo maximum load-balancingcommand to restore the default.

Examples # Specify the maximum number of load balanced routes as 2.

<Sysname> system-view

[Sysname] rip

[Sysname-rip-1] maximum load-balancing 2

network

Syntax network network-address

undo network network-address

View RIP view

Parameters network-address: IP address of a network segment, which can be the IP network address of any interface.

Description Use the network command to enable RIP on the interface attached to the specified network.

Use the undo network command to disable RIP on the interface attached to the specified network.