3Com MSR 50 Print connection-info, Syntax print connection-info Undo print connection-info, 909

909

Parameters string: Screen code of the terminal, containing 1 to 15 case-insensitive characters.

Description Use the menu screencode command to configure a menu screen code.

Use the undo menu screencode command to remove the menu screen code.

By default, no such a screen code is configured.

Some types of terminals provide the screen saving function. When such a terminal receives a specific screen code, such as E!10Q (for details about screen codes, refer to the related terminal manuals), it saves the current interface and switch to the corresponding screen.

Note that this function requires terminal support and the screen code configured on the router and that specified on the terminal must be the same. Screen codes vary with terminal types. For details, refer to the corresponding terminal manuals. For example, Start terminals support E!8Q, E!9Q, E!10Q, E!11Q, E!12Q, and E!13Q.

Example # Configure a menu screencode of E!10Q.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc]menu screencode E!10Q

print connection-info

Syntax print connection-info

undo print connection-info

View Terminal template view

Parameters None

Description Use the print connection-infocommand to enable the printing of terminal connection information on the terminal.

Use the undo print connection-infocommand to disable the printing of terminal connection information.

By default, terminal connection information is printed on the terminal.

To facilitate your operation, after a TCP connection is established between the terminal and the FEP, the terminal will display a message indicating that the connection is successful. To disable the prompt message from being displayed, use the undo print connection-infocommand.

Make sure you enable the router to print characters on the terminal before using this command.