3Com MSR 30, MSR 50 manual Display ospf request-queue, Keep neighbor relationship Init

1126 CHAPTER 76: OSPF CONFIGURATION COMMANDS

If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed.

Examples # Display OSPF neighbor statistics.

<Sysname> display ospf peer statistics

OSPF Process 1 with Router ID 1.1.1.1

			Neighbor Statistics
Area ID	Down	Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.1	0	0	0	0	0	0	0	1	1
Total	0	0	0	0	0	0	0	1	1
Table 273 Description on the fields of the display ospf peer statistics command
Field	Description
Area ID	Area ID
Down	Under this state, neighbor initial state, the router has not received any
	information from a neighboring router for a period of time.
Attempt	Available only in an NBMA network, such as Frame Relay, X.25 or ATM.
	Under this state, the OSPF router has not received any information from a
	neighbor for a period but can send Hello packets with a longer interval to
	keep neighbor relationship.
Init	Under this state, the router received a Hello packet from a neighbor but the
	packet gives no ID of the router, mutual communication is not available.
2-Way	Indicates mutual communication between the router and its neighbor is
	available. DR/BDR election finished under this state (or higher).
ExStart	Under this state, the router decides on sequence numbers for DD packets.
Exchange	Under this state, the router exchanges routing information with the
	neighbor.
Loading	Under this state, the router requests the neighbor for needed LSAs.
Full	Indicates LSDB synchronization has been accomplished between neighbors.
Total	Total number of neighbors under the same state

display ospf request-queue

Syntax display ospf [ process-id ] request-queue[ interface-type interface-number ] [ neighbor-id ]

View Any view

Parameters process-id: OSPF process ID, in the range 1 to 65535. interface-typeinterface-number: Interface type and number. neighbor-id: Neighbor’s router ID.

Description Use the display ospf request-queuecommand to display OSPF request list information.

If no OSPF process is specified, OSPF request list information of all OSPF processes is displayed.