3Com MSR 30, MSR 50 manual Interface virtual-template, Ip address ppp-negotiate

508CHAPTER 31: PPP AND MP CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] interface mp-group 3

[Sysname-Mp-group3]

interface virtual-template

Syntax interface virtual-ethernet number

undo interface virtual-ethernet number

View System view

Parameter number: VT number, ranging from 0 to 1023.

Description Use the interface virtual-templatecommand to create a VT or enter VT view.

Use the undo interface virtual-template command to remove a VT.

To remove a VT, make sure that all the relevant VA interfaces are removed and the

VT is not being used.

Example # Create VT 10 interface.

<Sysname> system-view

[Sysname] interface virtual-template 10

[Sysname-Virtual-Template10]

ip address ppp-negotiate

Syntax ip address ppp-negotiate

undo ip address ppp-negotiate

View Interface view

Parameter None

Description Use the ip address ppp-negotiatecommand to enable IP address negotiation on the local interface, so that the local interface can accept the IP address allocated by the remote end.

Use the undo ip address ppp-negotiatecommand to disable IP address negotiation.

By default, IP address negotiation is disabled.

Related command: remote address, ppp ipcp remote-address forced.

Example # Configure the IP address of interface Serial 1/0 to be negotiable.