3Com MSR 50, MSR 30 manual Reset ipx statistics, Reset ipx routing-table statistics protocol, 2551

2551

Parameter network.node: Destination address. The argument network is an eight-bit hexadecimal number ranging from 0x1 to 0xFFFFFFFD. The argument node is a 48-bit value represented by a triplet of four-digit hexadecimal numbers separated by “-”. The 0s in front can be omitted when inputting.

-ccount: Number of ping packets to be sent. By default, the value is 5. This value ranges from 1 to 4,294,967,295.

-ttimeout: Timeout interval of ping packets in milliseconds. By default, the value is 2 milliseconds. This value ranges from 0 to 65,535.

-ssize: Ping packet size, in bytes. By default, the value is 100 bytes. This value ranges from 44 to 1,500.

Description Use the ping ipx command to check host reachability and network connectivity in an IPX network.

Example # Ping the destination address at 675.0000-a0b0-fefe.

<Sysname> ping ipx 675.0000-a0b0-fefe

reset ipx statistics

Syntax reset ipx statistics

View User view

Parameter None

Description Use the reset ipx statistics command to clear IPX statistics.

Example # Clear IPX statistics.

<Sysname> reset ipx statistics

reset ipx routing-table statistics protocol

Syntax reset ipx routing-table statistics protocol [ all default direct rip static ]

View User view

Parameter all: Clears the statistics of IPX routes of all types. default: Clears the statistics of the default IPX route. direct: Clears the statistics of the direct IPX routes. rip: Clears the statistics of the IPX RIP routes. static: Clears the statistics of the static IPX routes.