3Com MSR 30, MSR 50 manual Display x25 map, Related command x25 hunt-group, Syntax display x25 map

426CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS

Parameter hunt-group-name: Hunt group name, a string of 1 to 30 characters.

Description Use the display x25 hunt-group-infocommand to view the status information of X.25 hunt group.

You can use this command to learn the hunt group of the Router and the information about the interfaces and XOT channel inside the hunt group.

Related command: x25 hunt-group.

Example # Display the status information of X.25 hunt group hg1.

<Sysname> display x25 hunt-group-info hg1
HG_ID : hg1	HG_Type: round-robin
member	state	vc-used	in-pkts	out-pkts
Serial1/0	Last used	2	51	20
Serial2/0	Next	1	21	15
1.1.1.1	Normal	1	24	3
Table 57 Description on the fields of the display x25 hunt-group-info command
Field		Description
HG_ID : hg1		The hunt group name is hg1
HG_Type: round-robin		Hunt group call channel selection policy (including round-robin
		and vc-number)
member		Interfaces or XOT channel contained in hunt group
state		The state of the current interface or XOT channel, including:
		Last used: latest used
		Next: next selected
		Normal: normal state
		Unavail: Unavailable state
vc-used		Number of calls on the interface or XOT channel (including call
		success and call failure)
in-pkts		Input flow on the interface or XOT channel in packets
out-pkts		Output flow on the interface or XOT channel in packets

display x25 map

Syntax display x25 map

View Any view

Parameter None

Description Use the display x25 map command to display the X.25 address mapping table.

The X.25 address mapping can be configured in two methods: using the x25 map command or using the x25 pvc command. The display x25 map command can display all the address mappings.