3Com MSR 50, MSR 30 manual Keepalive retry, Pre-shared-key VPN domain view, View VPN domain view

1727

Example # Configure the interval for sending keepalive messages from VAM client to VAM server to 30 seconds.

<Sysname> system-view

[Sysname] vam server vpn 1

[Sysname-vam-server-vpn-1] keepalive interval 30

keepalive retry

Syntax keepalive retry retry-times

undo keepalive retry

View VPN domain view

Parameter retry-times: Maximum number of attempts of sending keepalive message from VAM client. It is in the range 1 to 6.

Description Use the keepalive retry command to configure the maximum number of attempts of sending keepalive message from VAM client to VAM server. If the maximum number of attempts is reached but no response is received by a VAM client, the VAM client regards that the connection is broken.

Use the undo keepalive retry command to restore to the default value.

By default, the maximum number of attempts of sending keepalive message from

VAM client is 3.

Note that the VAM server sends this setting in a registration response to its clients. All clients in a VPN have the same keepalive settings, but if you change the keepalive settings of the server, the new settings are sent to only clients that register later; all clients registering before use the old settings.

Related command: vam server vpn, keepalive interval

Example # Configure the maximum number of attempts of sending keepalive message from VAM client to 5.

<Sysname> system-view

[Sysname] vam server vpn 1

[Sysname-vam-server-vpn-1] keepalive retry 5

pre-shared-key (VPN domain view)

Syntax pre-shared-key { cipher simple } key-string

undo pre-shared-key

View VPN domain view